Skip to content

Repairs and maintenance

Damp proofing: find a vetted damp specialist near you

A damp patch is a sign to investigate, not a diagnosis. Before paying for treatment, you should understand where the moisture is coming from and why the proposed work will help. Tell Pinnacle what you have noticed and we will help you find vetted tradespeople for the project.

Start your project

Free for homeowners. No obligation to hire.

Illustration of damp assessment and treatment
Good work starts with the right people.

Worth thinking about

Start with the cause

Leaks, rain penetration and condensation can look similar to a homeowner but call for different responses. Describe when the problem appears, whether it changes with the weather and what has already been tried. Ask for the findings and recommended treatment in writing, including anything that needs another trade's attention.

The work

What can your project include?

  • Investigation of damp symptoms in walls and floors
  • Remedial work following an assessment
  • Moisture-related repairs as part of a renovation

Why we are here

Why Pinnacle exists

Cowboy builders have cost families their savings, and the tradespeople who turn up on time and do the work properly get tarred with the same brush. Most platforms check the company rather than the person who will be standing in your kitchen.

Pinnacle vets the individual. Our founder, Graham Nash, has spent 25 years helping families rebuild after they were let down, more than 500 of them, sometimes out of his own pocket. Identity, insurance, relevant qualifications and references are all checked by a person, against the standard he built that work to.

It costs you nothing, and you are not handed a list and left to it. Pinnacle stays in the middle for the whole project, so if something needs sorting out there is someone to tell.

Graham's story

Pinnacle of All Trades

What happens after you register

You should not have to start from scratch with a list of names. Our vetting follows the standard our founder, Graham Nash, has spent 25 years building. We find suitable tradespeople for your project, so you can concentrate on what your home needs.

  1. Tell us what you need

    Share the work, your postcode and your timing. Add photos or plans if you have them. It is fine to say what you are still deciding.

  2. We find suitable tradespeople

    We match the project with vetted tradespeople. Identity, insurance, relevant qualifications and references are checked before introductions.

  3. You decide how to proceed

    Discuss the work, ask questions and agree the scope and quote before hiring. Pinnacle stays involved, so you have someone to contact if a concern comes up.

Your own project area

Once we have looked at your project, we set up your own project area on Pinnacle and send you the link. You can see where the project stands and what happens next, read the tradespeople we introduce by name, ask one of them to contact you, add photos or documents as the work is scoped, tell us if something is wrong, and keep the project up to date as things change.

More about our checks

A clearer quote

What affects the cost?

The cause, affected area, access and work needed afterwards determine the scope. Removing plaster, repairing a leak and redecorating may sit outside a treatment quote. Understand those boundaries and any conditions attached to a guarantee before deciding.

Before you hire any builder

Graham's homeowner survival kit

From 25 years of helping homeowners after they've been let down. The things every family should check before signing a contract.

On payment

  • Matters most hereGet a staged quote, not a lump sum. Each stage clearly priced.
  • Never pay fully up front. Builders who insist on it can disappear with the money.
  • Watch for front-loading. A schedule weighted heavily at the start means the builder is covering their risk, not yours.
  • Pay by credit card where possible. You get legal protection if something goes wrong.
  • Pay into a business account in the right name. Never in cash, and match the account name to the person doing the work.

On contracts

  • Matters most hereGet it in writing, signed by both parties. Include scope, timescale, and what counts as additional work. Most disputes happen at the back end of a project because nobody agreed up front what was extra and what wasn't.

On insurance

  • Check both their public liability AND employers' liability before work starts.
  • Make sure your own home insurance is set up correctly for the work being done.

On permissions

  • Get planning permission, or confirm permitted development applies, before any work starts. Extensions, new roofs, anything structural.
  • Building Regulations approval is separate from planning. Get a building inspector to sign off where required.
  • Use a structural engineer for any timber or steel work that goes into the property.

On materials

  • For bespoke items like windows, steel or anything custom, pay the supplier directly, not through the builder.

No checklist is foolproof, and neither is any vetting. We check every tradesperson hard, but if a job ever stops feeling right, trust your instincts, run it past this list, and tell us. Because Pinnacle of All Trades sits in the middle, you're never sorting it out on your own.

The survival kit on its own page, to keep or share

More advice for homeowners

Not just our word for it

From homeowners

Graham has been on ITV This Morning talking about what every homeowner should know before hiring, and in 2021 he was voted the inaugural winner of the SGS Local Hero Award, taking 39% of over 2,000 public votes.

"Contacted Smith Bros Roofing from Pinnacle of All Trades. He was outstanding with the service, came the same day to give a quote and got the job done within 5 hours."

Rashad Mahmood

Homeowner

Before you start

Your questions, answered

Can a photograph identify the cause?

It can help explain the symptoms, but an assessment may be needed to identify the source. Avoid choosing a treatment solely from the appearance of a patch.

Should I redecorate first?

It is better to understand and address the cause before covering the affected area. Ask when the surfaces will be ready for finishing.

What should a treatment quote explain?

The diagnosis, proposed work, exclusions, making good and any monitoring or aftercare. Ask questions if it names a product without explaining the problem it addresses.

Can this be part of a larger renovation?

Yes. Share the wider plans so moisture-related work can be considered before new plaster, floors and finishes are installed.

Is Pinnacle free for homeowners?

Yes. Registering a project and being introduced to tradespeople costs you nothing, and we take no commission on the work.

Do I have to hire anyone?

No. There is no obligation at any point. Talk to whoever we introduce, get quotes, and walk away if none of them is right for you.

How many tradespeople will I hear from?

It depends on who is available and suitable near you, so it may be one or it may be several. Nothing is exclusive, so you can compare before you decide.

What if something goes wrong?

Tell us. Pinnacle stays in the middle for the whole project rather than stepping back after the introduction, so you are not sorting it out on your own.

How do you vet tradespeople?

A screening call first, then identity, insurance, relevant qualifications and references, all checked by a person before anyone is put in front of you.

Your home. Your next step.

Tell us what you have in mind.

We will help you find the right people to talk to about damp assessment and treatment.

Start your project

Free for homeowners. No obligation to hire.